DAP152BAW-I Replacement filter

Weak airflow is usually caused by a clogged filter or a blocked intake/outlet:

1. Check and Replace Filters
   Dirty or clogged filters are the number one reason for a lack of air. Replace or clean filters as recommended in your owner’s manual.
2. Adjust Your Fan Settings
   Ensure the fan speed isn’t set too low. Try increasing it for more airflow.
3. Obstructions
   Check that nothing is blocking the air intake or outlet. Remove any dust or debris from vents and around the fan.
4. Check the Fan
   If the fan isn’t spinning freely, check for dust buildup or obstructions. Clean gently with a cloth as needed. If the fan or motor seems faulty, we recommend that you contact a technician for service.

Regular maintenance and filter changes will keep your air purifier running efficiently.

If your air purifier isn’t turning on, start with the basics:

1. Check the Power Supply
   Make sure your air purifier is plugged in securely and the outlet is working (try testing the outlet by plugging in another device).
2. Examine the Power Cord
   Inspect the cord for damage. If it’s frayed or broken, stop using the purifier and replace the cord.
3. Check the Filter and Cover Placement
   Many purifiers won’t operate if the filter or cover isn’t installed correctly. Double-check that all parts are seated properly. Check your owner’s manual for instructions.
4. Reset or Power Cycle the Air Purifier
   Try unplugging the unit for 30 seconds, then plug it back in and turn it on.

If it still won’t turn on, the issue could be internal, and you may need to contact a technician for service.