24″ Built-in Dishwasher – 12 Place Settings

If your dishwasher has an unpleasant odour, here’s what to do:

1. Inspect for Food Buildup:
   Food particles can get trapped in the filters or collect as standing water at the bottom of the dishwasher, causing bad smells.
2. Clean Key Components:
   Remove and clean the filter, spray arms, and door seals thoroughly to get rid of trapped debris and residue.
3. Run a Cleaning Cycle:
   Use a dishwasher cleaner or place a cup of white vinegar on the top rack and run a hot cleaning cycle. This helps eliminate odours and buildup inside the dishwasher.

Regular cleaning helps keep your dishwasher smelling fresh and running efficiently

If your dishes aren’t coming out clean, here’s what you should check:

1. Inspect Spray Arms and Filters:
   Clogged spray arms or filters can prevent water from reaching your dishes properly. Carefully remove the spray arms and filters, rinse them under running water, and soak them in vinegar if you notice mineral buildup. After cleaning, rinse thoroughly and reinstall them.
2. Load Dishes Properly:
   Make sure you’re loading your dishwasher correctly, avoid overcrowding and overfilling the dishwasher. Overloading can block water flow and reduce cleaning effectiveness.

Following these steps usually improves cleaning performance. If your dishes still aren’t coming out clean, you might want to check your detergent, water temperature, or consider running a cleaning cycle on your dishwasher.

If your dishwasher is leaking, here are some key areas to inspect:

1. Check Hose Connections:
   Inspect all hoses and connections at the back of the dishwasher to ensure they are securely attached. Loose or damaged hoses can cause leaks. Tighten any loose connections as needed.
2. Inspect the Door Gasket:
   The door gasket (seal) prevents water from escaping during a wash cycle. Check for cracks, tears, or food debris on the gasket. Clean it gently with a damp cloth, and if it’s damaged, replace it to maintain a proper seal.

If your dishwasher isn’t draining properly, here are some common causes and steps you can take:

1. Check the Drain Filter:
   Food particles and debris can clog the drain filter, preventing water from draining. Remove the filter (usually found at the bottom of the dishwasher) and clean it thoroughly under running water.
2. Inspect the Drain Hose:
   The drain hose can become kinked, bent, or clogged. Check the hose for any blockages or sharp bends and straighten it out if needed. Make sure the hose is clear and water can flow freely.

If you’ve cleaned the filter and checked the hose but your dishwasher still won’t drain, it’s best to contact a professional for service.